Roofing felt is a roll-based bitumen-based material. It’s suitable for constructing or restoring a so-called flat roof (which isn’t completely flat and actually slopes a few degrees) since, when used correctly, it can completely waterproof the roof. Most other roofing materials, such as shingles, must be installed on a pitched roof with a minimum slope of 20%, or rain will get in between the shingles and into the wooden structure, as it does occasionally when there is strong wind. For this reason, many people prefer roofing felt for a flat roof, such as a garage roof, because it is relatively inexpensive, durable, and attractive. Have a look at Roofing Companies to get more info on this.
Because garage roofs are typically plain with few to no openings, vents, or odd angles, you might be able to get away with using roof felt. These elements present a challenge when roofing with felt because the material is most fragile where one piece ends and another begins. While it may seem to be similar to other roofing materials, it is still significant. If you, like many others, believe that felt roofing is easy, you may be surprised to learn how much skill and experience are needed to do a good job once the roof is more than just a rectangle to be covered. As long as the roof has a fair slope, it is less of a problem.
When the roof is nearly level, however, puddles are more likely to form on the roof. A small amount of water doesn’t need much of a hollow. There is a possibility if the felt around the vent is not correctly installed if it is placed near roof ventilation, which is effectively a roof penetration. Allowing water to sit for even a few days would eventually lead to a leaking roof. But do you think you’ll be able to handle it on your own? Let’s look at how to instal roofing felt, which is something that a lot of people want to do on their own.